Product Description
Harvia Cilindro Plus PP70E – spacious pillar heater for an intensive sauna experience
The Harvia Cilindro Plus PP70E combines a distinctive pillar design with an exceptionally large stone capacity. With a heating output of 6.8 kW, this electric sauna heater is suitable for sauna cabins with a volume of 6 to 10 m³.
Its tall, open steel-grid construction keeps the sauna stones visible around the heater and creates a modern, high-quality appearance. The brushed stainless-steel finish blends harmoniously into both traditional and contemporary sauna interiors.
Up to 90 kg of sauna stones for soft and abundant steam
The Harvia Cilindro Plus PP70E can be filled with up to 90 kg of suitable sauna stones. The large stone mass stores a considerable amount of heat and produces even, pleasant sauna steam.
The intensity of the infusion can be adjusted depending on where the water is poured. Pouring water directly onto the top of the stone column produces stronger and more intensive steam. Pouring water onto the stones at the side creates a gentler and softer sauna experience.
Ideal for installation into a sauna bench
The floor-standing pillar heater can be installed freely inside the sauna cabin or integrated into a sauna bench using suitable accessories. Its slim vertical design requires relatively little floor space while making the heater an attractive focal point.
When installing the heater into a sauna bench, the specified safety distances and the manufacturer’s installation instructions must be observed. Suitable embedding flanges and protective accessories are available separately depending on the installation situation.
Operation with a separate sauna control unit
The PP70E is an E-model without integrated controls. A compatible external sauna control unit is therefore required for operation. Depending on the selected control system, the heater can be operated conveniently from a suitable location inside or outside the sauna cabin.
The separate control system makes the heater particularly suitable for installation into a sauna bench, as no controls mounted directly on the heater need to remain accessible.
Important information about the control unit
A sauna control unit is not integrated into the heater and must be selected separately. The control unit must be suitable for the heater’s output and electrical connection type. The technical requirements of the control-unit manufacturer must also be observed.
High-quality brushed stainless-steel finish
The brushed stainless-steel exterior gives the Harvia Cilindro Plus PP70E a timeless and professional design. The open steel grid leaves the sauna stones visible and supports the even distribution of heat throughout the sauna room.
The stable floor-mounted construction allows vertical installation. The heater is designed for indoor use in humid sauna environments and has an IPX4 protection rating.
Technical data for the Harvia Cilindro Plus PP70E
| Manufacturer |
Harvia |
| Product series |
Cilindro Plus |
| Model |
PP70E |
| Harvia product number |
HPP700400E |
| Output |
6.8 kW |
| Recommended sauna volume |
6–10 m³ |
| Maximum stone capacity |
90 kg |
| Recommended stone size |
Ø 5–10 cm |
| Control system |
Separate external control unit required |
| Installation |
Floor-standing, vertical |
| Material |
Steel |
| Finish |
Brushed stainless steel |
| Electrical connection |
400 V 3N~ |
| Fuse rating at 400 V 3N~ |
3 × 10 A |
| Connection cable at 400 V 3N~ |
5 × 1.5 mm² |
| Protection rating |
IPX4 |
| Net weight |
10.2 kg |
| EAN |
6417659022651 |
Safety distances and professional installation
The sauna heater must only be installed in accordance with the applicable installation, electrical and safety regulations. The electrical connection must be carried out by a qualified electrician.
The manufacturer specifies, among other requirements, a safety distance of 100 mm at the front, sides and rear from non-combustible materials and a distance of 880 mm from the ceiling. The minimum room height is 2 metres. Depending on the installation situation, additional protective measures or larger distances may be required.
Information about sauna stones
Only angular stones suitable for sauna heaters and with a recommended size of 5 to 10 cm should be used. The stones must be placed loosely between the heating elements to ensure sufficient air circulation through the heater.
Packing the stones too tightly may restrict air circulation, increase the heating time and place excessive strain on the heating elements. The stones should be inspected regularly and rearranged or replaced when necessary.
Product benefits at a glance
- Large stone capacity for particularly even heat
- Choice of gentle or intensive infusions
- Elegant pillar design with visible stones
- High-quality brushed stainless-steel finish
- Suitable for sauna cabins from 6 to 10 m³
- Ideal for free-standing installation or integration into a sauna bench
- Flexible operation with a separate control unit
- Compact footprint thanks to the vertical construction
Scope of delivery
- 1 × Harvia Cilindro Plus PP70E electric sauna heater
- Installation and operating documentation
Please note: Sauna stones, the external sauna control unit, power unit, embedding flange and other installation accessories are only included when expressly specified as part of the respective offer.
Conclusion
The Harvia Cilindro Plus PP70E with 6.8 kW is an excellent solution for anyone looking for a powerful pillar heater with a large stone capacity and a high-quality stainless-steel design. The capacity of up to 90 kg of sauna stones provides long-lasting heat and varied infusion options. Operation via a separate control unit allows flexible planning and makes the heater especially suitable for integration into a sauna bench.
