The installation of a wood-burning sauna stove such as the HUUM HIVE Flow LS must be carefully planned and professionally carried out. Since this is a wood-burning stove with a firebox, flue gas system and high surface temperature, all applicable safety regulations, structural requirements and manufacturer instructions must be observed. Sufficient safety distances from walls, ceilings, combustible materials and furnishings are particularly important.
The HIVE Flow LS is designed for a very large quantity of stones. The stones must not be placed too tightly so that air can circulate freely inside the stove. A stone filling that is too compact can obstruct airflow, impair combustion and reduce performance. For optimal results, suitable sauna stones should be used and checked regularly, as stones can wear over time due to heat and water infusions.
Since the LS version is intended for heating from another room, the wall penetration must be planned with particular care and safety. The area around the firebox and the adjacent structural elements must be suitable for the heat generated. The connection to the chimney must also be carried out professionally and must match the output and design of the stove.
Adequate air supply is essential for operation. Wood combustion requires oxygen, and insufficient ventilation can worsen combustion, promote smoke development and reduce efficiency. A suitable non-combustible floor area in front of the stove door is equally important, as sparks or embers may escape when adding wood.
Before regular first use, the stove should be prepared and checked according to the manufacturer’s instructions. Use only suitable, dry firewood and do not overload the firebox. Clean combustion, correctly placed stones and regular maintenance make a decisive contribution to ensuring that the HUUM HIVE Flow LS operates safely, efficiently and reliably over the long term.
