Product Description
Harvia VitaMy Replacement Glass SP-VIGL for 500, 750 and 1300 W Infrared Heaters
The Harvia VitaMy replacement glass SP-VIGL is a genuine spare part for Harvia VitaMy full-spectrum infrared heaters. The black front glass panel is made of heat-resistant ceramic glass and has been specially developed for models with 500, 750 and 1300 watts. It serves as a replacement for damaged or broken glass covers.
With the appropriate genuine replacement glass, the damaged front panel of an existing VitaMy infrared heater can be replaced without having to replace the entire unit. This spare part is specifically designed to match the construction of compatible Harvia VitaMy heaters.
Genuine Replacement Glass Made of Heat-Resistant Ceramic Glass
VitaMy infrared heaters feature a black front panel made of heat-resistant ceramic glass. This panel forms the front cover of the infrared heater and is designed to withstand the high temperatures generated during operation.
Features of the Harvia VitaMy Replacement Glass
-
Genuine Harvia spare part: Precisely designed for the specified VitaMy infrared heaters.
-
Heat-resistant ceramic glass: Suitable for the thermal requirements of compatible full-spectrum infrared heaters.
-
Black glass surface: Matches the original appearance of the VitaMy series.
-
Targeted replacement: Allows a damaged front glass panel to be replaced without replacing the entire infrared heater.
-
Suitable for multiple power ratings: Compatible with VitaMy models rated at 500, 750 and 1300 watts.
-
Original spare part number: SP-VIGL for clear product identification.
Compatibility with Harvia VitaMy Infrared Heaters
The SP-VIGL replacement glass has been developed for the following Harvia VitaMy full-spectrum infrared heaters:
| Model |
Power |
Compatibility |
| Harvia VitaMy HVIS-500M |
500 W |
Compatible |
| Harvia VitaMy HVIS-750M |
750 W |
Compatible |
| Harvia VitaMy HVIS-1300M |
1300 W |
Compatible |
Important Model Compatibility Information
The SP-VIGL replacement glass is intended for the specified VitaMy models with a black glass front panel.
For the smaller Harvia VitaMy HVIS-350M infrared heater with 350 watts, the replacement glass SP-VIGS is required.
The HVIS-S-500M model with an integrated seat sensor requires a special front glass panel with a corresponding cutout. This version is available under spare part number SP-VIGL-S.
Please check the exact model designation of your infrared heater before ordering.
Replacing a Damaged Front Glass Panel
The front glass panel of an infrared heater may become damaged due to mechanical stress, impacts or improper handling. If cracks, chips or broken glass occur, the damaged cover must be replaced.
According to Harvia's installation and operating instructions, infrared heaters with damaged or broken front glass panels must not be operated.
Installation Instructions
- Switch off the infrared heater completely and disconnect it from the power supply before starting any work.
- Allow the unit and glass panel to cool down completely.
- Carefully remove the damaged front glass panel, avoiding mechanical stress on the remaining components.
- Install the new genuine replacement glass according to the manufacturer's installation and operating instructions.
- Ensure that the glass panel is correctly positioned and securely fastened.
- Do not operate the infrared heater again until the glass panel has been properly installed.
Safety information: The infrared heater must only be operated with the front glass panel correctly installed. The glass surface reaches high temperatures during operation and must not be touched. Observe all safety and installation instructions provided by the manufacturer.
Technical Product Information
| Manufacturer |
Harvia |
| Product name |
VitaMy Replacement Glass |
| Manufacturer part number |
SP-VIGL |
| EAN |
6417659042673 |
| Product category |
Spare parts for infrared heaters |
| Material |
Heat-resistant ceramic glass |
| Colour |
Black |
| Design |
Front glass panel without cutout for seat sensor |
| Compatible models |
HVIS-500M, HVIS-750M, HVIS-1300M |
| Compatible power ratings |
500 W / 750 W / 1300 W |
| Application |
Harvia VitaMy full-spectrum infrared heaters |
| Scope of delivery |
1 x Replacement glass SP-VIGL |
Cleaning and Maintenance
To keep the glass panel in good condition over time, it should be cleaned regularly and gently.
- Switch off the infrared heater before cleaning.
- Wait until the glass surface has cooled down completely.
- Clean the glass with a slightly damp, soft cloth.
- Avoid excessive mechanical stress on the glass surface.
- Never pour water directly onto the infrared heater.
Scope of Delivery
- 1 x Harvia VitaMy genuine replacement glass SP-VIGL for 500/750/1300 W
Please note: Only the replacement glass is supplied. The complete infrared heater, heating element and other accessories are not included.
Why Choose Genuine Harvia Replacement Glass?
The Harvia VitaMy replacement glass SP-VIGL is specifically designed for the intended full-spectrum infrared heaters. By choosing a genuine spare part, you can ensure that the design and compatibility of the glass panel meet the manufacturer's specifications.
Replacing a damaged front glass panel allows an otherwise functional infrared heater to continue being used and may eliminate the need to replace the entire unit.
Order the genuine Harvia VitaMy replacement glass SP-VIGL for your 500, 750 or 1300 W infrared heater conveniently online at Amilano.
