Technical Data
Product Information
| Item information | Value |
|---|---|
| GTIN: | 6417659029872 |
| HAN: | C400VKK |
| Category: | Finnish Sauna Controls |
| Supply voltage, phase: | 400 V 3N~ |
| Country of origin: | Finland |
| Lighting Control: | Optional |
| Ventilation control: | Optional |
| Width: | 325 mm |
| Height: | 560 mm |
| Depth: | 115 mm |
| Max. load: | 40.0 kW |
| Smartphone control: | No |
| Temperature adjustment range (min-max) C: | 40 - 110 °C |
| Delayed On Setting Range: | 1–12 h, 18h, 24h |
Product Description
Control unit C400VKK is intended for the control of electric heaters in commercial saunas with heater output up to 40 kW. The control unit consists of a control unit and a thermostat. The control unit's programmable week programs allows the heater to be switched on and off repeatedly on different days of the week. The control unit can also be remotely controlled to switch the sauna heater on and off at any desired time. If needed, the heater can be turned on with the manual button on the control unit. The control unit regulates temperature in the sauna room based on information given by a sensor. The temperature sensor and the overheat protector are located in a temperature sensor box. Temperature is sensed by an NTC thermistor and the overheat protector can be reset. The control unit can be equipped with an additional sensor, a safety or a door switch, and a remote switch. By using two sensors, it is possible to acquire more accurate temperature readings from the sauna room. The control unit can be used to preset start of the heater (pre-setting time).
Harvia oy, Teollisuustie 1-7, 40950 Muurame, Finnland, harvia@harvia.com
