The installation of the HUUM Hive Wood 17 LS must be planned carefully and carried out according to the manufacturer’s safety and installation requirements. As a wood-fired sauna stove, it combines high temperatures, open combustion, strong radiant heat and exhaust gas routing. For this reason, sufficient safety distances from walls, ceilings, benches and other surrounding materials must be respected. The stove must be installed in a way that prevents overheating of nearby surfaces and allows safe access for firing, maintenance and regular use.
A suitable non-combustible floor solution is essential. The area around the stove must be protected from heat, sparks and embers that can occur when adding firewood or opening the stove door. Depending on the sauna structure and floor material, an appropriate floor plate or fireproof base may be required. This is not only a safety detail, but also protects the sauna floor from long-term damage, discoloration and mechanical wear.
Before the stove is used inside the sauna, it should be pre-burned according to the manufacturer’s instructions. During the first heating process, production residues may burn off and cause smoke or odor development. This first burn should therefore be carried out before the final sauna operation. Only after this step should the stove be placed into regular use in the sauna cabin.
Correct firewood length is also important for efficient and clean operation. The recommended firewood length is 300 mm, while the maximum length is 400 mm. Wood that is too long or unsuitable can reduce combustion efficiency, disturb airflow inside the combustion chamber and make operation less stable. Dry, suitable firewood supports cleaner burning, better heat output and longer stove life.
The sauna stones should have a size of 50 to 150 mm and must be arranged evenly in the stove. The stones should not be forced too tightly into the stone chamber, because proper air circulation is necessary for efficient heating and even heat distribution. The correct stone placement helps the stove reach its intended performance and improves the quality of the steam during infusions.
Adequate air supply is a central requirement for any wood-fired sauna stove. The combustion process needs enough oxygen to burn cleanly and efficiently. Poor ventilation can lead to weak performance, excessive smoke, unstable combustion and reduced comfort in the sauna room. Therefore, the sauna must have a properly planned air intake and ventilation concept that supports both combustion and a pleasant sauna climate.
The chimney connection and exhaust system must also be suitable for the stove and comply with the relevant local regulations. A correctly installed flue system is essential for safe operation, proper draft and reliable removal of combustion gases. Installation should be checked by a qualified professional where required. Following the installation and operating instructions carefully helps protect the stove, improve performance and ensure long-term safe use.
